Manual Transmission Casing Split

Had to start with tapping out Shift linkage pin. Remember from previous post could not get out under car. Then took out all Fill and Drain plugs. Then removed reverse light switch. Next the speed sensor. Next I pull out the Shift Selector De-tent Bolt/Spring/Ball. Take the Reverse Idle Bolt out next. Find the places…

Step by Step Separation Motor & Transmission

Start by locating as many Bolts as Possible. Don’t forget the Started Bolts. Don’t Forget the T-Bracket Bolts. There should be several Bolts on the Motor Side. There should be some Bolts holding on the Dust/Dirt Plate as well. A¬†person would need to also remove the Intermediate Shaft before separation¬†(3Bolts on back of Block)… forgot…