Step by Step Separation Motor & Transmission

Start by locating as many Bolts as Possible. Don’t forget the Started Bolts. Don’t Forget the T-Bracket Bolts. There should be several Bolts on the Motor Side. There should be some Bolts holding on the Dust/Dirt Plate as well. A person would need to also remove the Intermediate Shaft before separation (3Bolts on back of Block)… forgot…

Cleaning of the Transmission

This is what I started with…If you don’t have a hot tank to clean withor a parts washer… I have one. Just a little out of maintance right now.. I used Oven Cleaner, Hot Soapy Water, And ended with Laquer Thinner and a clean towel last. This is what it could look like after 1.5hours of…

Photo Gallery Step by Step Removal

Jack up car. Support safely with floor stands! Remove Tires and Wheels. I prefer using an Impact gun! Had one stubborn Lug nut. Required a Key that did not come with car. Nice! I was able to remove with a Pipe Wrench! Would not recommend using with nice wheels. Next, I like to start on…